TM 5-6115-465-S4
TO 35C2-3-446-2
NAVFAC P-8-625-34
TM 06858B/06859D-34
Section II. INTERCONNECTING WIRING HARNESSES
for layout, identification, and material requirements
4-8. GENERAL.
and Appendix A for detailed soldering and replace-
ment procedures.
The interconnecting wiring harnesses provide
electrical interconnection between generator set
c. Refer to the Operator and Organizational
control devices and the control cubicle assembly.
Maintenance Manual for wiring harness installation
Each interconnecting wiring harness consists of
instructions.
connectors, terminals, and wires. The wires of
each harness are strapped together to conserve
4-l2. GOVERNOR CONTROL UNIT TO HYDRAULIC
space, prevent unnecessary movement, and pro-
vide ease of removal and installation. Wiring
ACTUATOR UNIT WIRING HARNESS.
harnesses which are internal to an assembly are
not covered in this section. Refer to the mainten-
a. Refer to the Operator and Organizational
ance paragraph for the assembly for internal
Maintenance Manual for governor control unit to
wiring harness repair procedures.
hydraulic actuator unit wiring harness removal,
cleaning, inspection, and repair instructions.
4-9. TACTICAL RELAY ASSEMBLY TO SPECIAL
RELAY ASSEMBLY WIRING HARNESS.
b. If the wiring harness has sustained damage
and requires repair or rebuild, refer to figure 4-33
a. Refer to the Operator and organizational
for layout, identification, and material requirements
and Appendix A for detailed soldering and replacement
Maintenance Manual for removal, cleaning, inspec-
tion, and repair procedures of tactical relay as-
procedures.
sembly to special relay assembly wiring harness.
c. Refer to the Operator and organizational
b. If the wiring harness has sustained damage
Maintenance Manual for installation instructions.
and requires repair or rebuild, refer to figure 4-30
4-13. AC POWER CONTROL WIRING HARNESS.
for layout, identification, and material requirements
and Appendix A for detailed soldering and replace-
a. Refer to the Operator and Organizational
ment procedures.
Maintenance Manual for ac power control wiring
harness removal, cleaning, inspection, and repair
c. Refer to the Operator and Organizational
instructions.
Maintenance Manual for installation instructions.
4-10. SPECIAL RELAY ASSEMBLY TO STATIC
b. If the wiring harness has sustained damage
EXCITER WIRING HARNESS.
and requires repair or rebuild, refer to figure 4-34
for layout, identification, and material requirements
and Appendix A for detailed soldering and replace-
a. Refer to the Operator and organizational
ment procedures.
Maintenance Manual for special relay assembly to
static exciter wiring harness removal, cleaning,
c. Refer to the Operator and Organizational
inspection, and repair instructions.
Maintenance Manual for wiring harness installation
b. If the wiring harness has sustained damage
instructions.
and requires repair or rebuild, refer to figure 4-31
4-14. EXCITER CONTROL WIRING HARNESS.
for layout, identification, and material require-
ments and Appendix A for detailed soldering and re-
a. Refer to the Operator and Organizational
placement procedures.
Maintenance Manual for exciter control wiring harness
removal, cleaning, inspection, and repair instruction.
c. Refer to the Operator and Organizational
Maintenance Manual for wiring harness installation
b. If the wiring harness has sustained damage
procedures.
and requires repair or rebuild, refer to figure 4-35
4-11.
for layout, identification, and material requirements
LOAD MEASURING UNIT TO TACTICAL
and Appendix A for detailed soldering and replace-
RELAY ASSEMBLY WIRING HARNESS.
ment procedures.
a. Refer to the Operator and Organizational
c. Refer to the Operator and Organizational
Maintenance Manual for load measuring unit to
Maintenance Manual for wiring harness installation
tactical relay assembly wiring harness removal,
cleaning, inspection, and repair instructions.
procedures.
b. If the wiring harness has sustained damage
and requires repair or rebuild, refer to figure 4-32
4-41
