T.O. 35 C2-3-442-2
P-9-TM-457-35
TM-07464A-35 TM 5-6115-457-34
Legend to figure 6-52:
23.
Lock washer
1.
Cover
2.
24.
Washer
Screw assembly (8)
Terminal board assembly
3.
25.
Nut assembly (8)
Screw assembly (4)
4.
26.
Wire harness
Under voltage relay (K11)
27.
5.
Nut
Screw assembly (4)
28.
6.
Toggle switch (S10)
Permissive paralleling relay
7.
29,
Nut
(K16)
8.
Nut
9.
30.
Screw assembly (4)
Variable resistor (R28)
10.
31.
Screw assembly (3)
11.
(50/60 hertz)
Electronic component assembly (A6)
12.
Screw assembly (2)
32.
Screw (2)
13.
Nut assembly (2)
33.
Terminal board (TB1)
14.
34.
Terminal board (TB3)
Threaded standoff (2)
15.
Screw assembly (2)
Lock washer (2)
35.
16.
Lock washer (2)
36.
Bracket
17.
Cable Strap
37.
Rivet (4)
18.
Identification plate
Wire
38.
19.
39.
Chassis assembly
Resistor (R4, R5)
20.
Capacitor (C 1)
21.
Screw
22.
Threaded standoff
6-197. INSPECTION AND TEST.
6-198.
REPAIR.
a. Harness.
a. Repair or fabricate precise relay
box wire harness in accordance with figure
1. Inspect harness wiring for de-
6-53.
fective insulation and continuity.
b. Straighten dented or distorted sheet
2, Inspect harness connectors for
metal parts using proper tools. Blend in
damaged threads; bent, loose or missing
repaired area with a suitable abrasive
pins and for shorts.
paper and touch up painted surfaces. Re -
stencil panel markings as necessary.
b. Test rheostat (R28) for full re-
sistance value; 0-15K ohm 10 percent.
6-199. REASSEMBLY. Refer to figures
c. Test switch (S10) for proper make
6-49 and 6-52 and reassemble the precise
and break operation.
relay box in reverse order of index num-
hers assigned. Pay particular attention
d. Inspect terminal board (TB3) for
to the following.
cracks and missing hardware.
6-157
Change 3
