P -9-TM-457 -35 T.O. 35C2-3-442-2
TM-07464A-35 TM 5-6115-457-34
Legend to figure 6-26:
1.
Cover
20.
Nut assembly (8)
2.
Screw assembly (10)
21.
Screw assembly (8)
3.
22.
Washer (10)
Nut assembly (8)
4.
Nut
23.
Screw assembly (8)
Washer
5.
24.
Nut assembly (8)
6.
25.
Rheostat (R29)
Wire harness
7.
Electrical connector cover
26.
Screw assembly
8.
Electrical connector cover
27.
Washer
9.
Screw assembly (16)
28.
Jumper terminal board
10.
Nut assembly (16)
29.
Terminal board assembly
11.
Screw assembly (4)
30.
Screw assembly (8)
12.
Nut assembly (4)
31.
Nut assembly (8)
13.
Screw assembly (4)
32.
Terminal board (4)
14.
Nut assembly (5)
33.
Bracket
15.
Connector assembly
34.
Screw assembly (6)
16.
Chain assembly
35.
Washer (6)
17.
Connector
36.
Electronic component
18.
Dummy connector
assembly
19.
Screw assembly (8)
37. Rivet (4)
20.
Nut assembly (8)
38. Identification plate
21.
Screw assembly (8)
39. Chassis assembly
6-103. INSTALLATION. Refer to figure
e. Test mode I relay box assembly as
outlined in paragraph 6-97.
6-15, and install the mode I relay box as-
sembly. Secure the assembly in position
using four screws and nuts. Refer to the
f. Secure cover (1, figure 6-26) to
Operator and Organizational Maintenance
chassis assembly (39) using ten screw
Manual and reconnect all electrical plug
assemblies (2) and washers (3).
connectors to the assembly receptacles.
6-77
