LUBRICATION ORDER
ARMY L05-6115-622-12
26 MAY 1992
NAVY LOP8-635-12
GENERATOR SET, DIESEL ENGINE-DRIVEN, WHEEL MOUNTED
750-KW, 3-PHASE, 4-WIRE, 2200/3800 AND 2400/4160 VOLTS
CUMMINS ENGINE COMPANY INC. MODEL KTA-2300G-2
DOD MODEL
CLASS
HERTZ
NSN
MEP-012A
UTILITY
50/60
References: TM 5-6115-622-12 and C9100-IL
REPORTING OF ERRORS
You can help improve this publication. If you find mistakes or if you know of a way to improve the procedures, please let
us know. Your letter or DA Form 2028 (Recommended Changes to Publications and Blank Forms) should be mailed
directly to: Commander, U.S. Army Troop Support Command, ATTN: AMSTR-MMTS, 4300 Goodfellow Blvd., St. Louis,
MO 63120-1798. A reply will be furnished to you.
NOTES
This LO is for (C) Crew/Operator or Unit (0) and Direct Support (F) maintenance. Lube intervals (on-condition or hard
time) and task hour times are based on normal hours of operation. Change the intervals if your lubricants are
contaminated or if you are operating the equipment under adverse operating conditions. Lube more during constant use
and less during periods of low activity. Adequate preservation precautions must be taken during Inactive periods.
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel
and property. Avoid repeated and prolonged skin contact. Do not use near open flame
or excessive heat. Flash point of solvent is 100F - 138F (38 - 60 ).
C
C
Clean parts with dry cleaning solvent PD-680 and dry before lubricating.
Dotted arrowpoints indicate lubrication on both sides of equipment.
Before you start your lube service:
ALWAYS
NEVER
a.
Clean parts before lubricating.
a.
Use wrong type/grade lubricant.
b.
Use the lubrication order as your guide.
b.
Use too much lubricant.
DISTRIBUTION STATEMENT A - Approved for public release; distribution is unlimited.
Card 1 of 4
