5.55 Cooling Blower Assembly Maintenance.
This task covers:
General Mechanic's Tool Kit
(item 2, appendix B)
Generator Set, 150kw, shut down,
Puller for Centrifugal Oil
Filter (PN 160010)
Sling/hoisting device, Universal
(item 7 appendix B)
Disconnect the negative battery cable first and then the positive battery terminal
cable. Failure to observe this warning could result in severe personal injury or
Remove unit hood assembly IAW Paragraph 4.14.
Remove oil line (27) from cover (7).
Remove screw cap hexagon (4), washer spring tension (5), washer flat (6), and remove cover (7).
Remove screw cap hexagon (4), washer spring tension (5) and ring (9).
Remove cover filter ( I 0) with puller (PN 160010).
Clean cover filter (10) and coupling clutch (15) with solvent and cloth to remove old oil and build up.
Replace O-ring (8) and O-ring (I 1).
Install cover filter (10), ring (9), washer spring tension (5). and screw cap hexagon (4) and tighten.
Install cover (7), washer flat (6), washer spring tension (5) and screw cap hexagon (4) and tighten.
Change 2 5-242