4.71 J2/24 V CONNECTOR RECEPTACLE MAINTENANCE.
This task covers:
General Mechanics Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
(item 10, appendix E)
Generator Set 150 kW shut down,
Disconnect the negative battery cable first and then the positive bat-
tery terminal cables. Failure to observe this warning could result in se-
vere personal injury or death.
Tag all cables prior to removal to ensure correct connection of the cables
Remove unit hood assembly (1, figure 4-58) as instructed in paragraph 4.14.
Open front panel (4) of control cabinet assembly (3) and secure with prop (5).
Remove eighteen screws (6), eighteen serrated lock washers (7), and eighteen washers (8) from
Lower control cabinet connection panel (9) and prop.
Remove cable (34) and varistor R8 (35) from terminal (32) of J2/24 V connector receptacle (31).
Remove nut (37) from J2/24 V connector receptacle (31).
Pull J2/24 V connector receptacle (31), and sealing ring (33), out of front of control cabinet connec-
tion panel (9).
Remove nut (40), serrated lock washer (39), washer (38), and ground terminal of varistor R8 (35)
from threaded pin (36).