• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2-3.  1.  Power Unit Operator PMCS Routing Diagram (PU-798A and PU-799A).
Operator Preventive Maintenance Checks and Services - continued - TM-9-6115-660-13P_44

TM-9-6115-660-13P Power Plant Diesel Engine Driven 1-Ton Trailer Mounted (With Racks) 3Kw 60 Hz AN/MJQ-42 Manual
Page Navigation
  13    14    15    16    17  18  19    20    21    22    23  
TM 9-6115-660-13&P Table 2-2.  Operator Preventive Maintenance Checks and Services NOTE If the equipment must be in continuous operation, check and service only those    items    that    can    be    checked    and    serviced    without    disturbing operation.  Make the complete checks and services when the equipment can be shut down. Location Item Interval Procedure Not Fully Mission No. Item to Capable if: Check/Service Location Item Interval Item to Procedure Not Fully Mission No. Check Service Capable if: WARNING Before performing any maintenance that requires climbing on or under trailer, make sure that trailer handbrakes are set, and front and rear trailer support legs are lowered.  Failure to observe this WARNING could result in severe personal injury or death. TRAILER 1 Before HANDBRAKES a Check for proper operation of Handbrake lever (1 handbrake lever (1).  Handbrake lever or 2) is locked in should move freely throughout its the applied position. entire travel. b Check for proper adjustment of handbrake lever (1) Handbrake lever is properly adjusted when additional force is required to move handbrake lever beyond two-thirds distance of travel toward the applied position.  If improperly adjusted, refer to step d. c With trailer hooked to towing vehicle, set the handbrake lever (1).  Move the trailer slightly to see if the handbrakes hold the wheels.  If not, proceed to step d. Change 2  2-9







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.