• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
5-19 PU-798 AND PU-799 GENERATOR MOUNTING RAIL MAINTENANCE
Figure 5-24.  PU-798A and PU-799A Generator Mounting Rail Replacement.

TM-9-6115-660-13P Power Plant Diesel Engine Driven 1-Ton Trailer Mounted (With Racks) 3Kw 60 Hz AN/MJQ-42 Manual
Page Navigation
  162    163    164    165    166  167  168    169    170    171    172  
TM 9-6115-660-13&P 5-20 PU-798A AND PU-799A GENERATOR MOUNTING RAIL MAINTENANCE. This task covers: a.   Removal c. Installation b.   Repair INITIAL SETUP Tools Equipment Conditions Tool Kit, General Mechanic’s Reference (item 1, appendix B) Rivet Gun (item 8, appendix B) Trailer handbrakes set, front support leg/landing leg lowered, and rear Materials/Parts leveling-support jacks lowered; paragraph 2-3.2.1.  Accessory box removed; paragraph Rivets (items 8, 9, and 10, appendix I) 4-19.  Generator set removed; paragraph 5-6.  Center floor removed; paragraph 5-16.1. REMOVAL Remove rivets (1 and 2, figure 5-24) and mounting rail (3) from trailer chassis (4). REPAIR Repair  of  generator  mounting  rails  consists  of  replacing  rivets  (5)  and  doubler  plates  (6  and  7),  and  rivets  (8)  and angle supports (9 and 10). INSTALLATION Place mounting rail (3) on trailer chassis (4) and secure with rivets (1 and 2). Change 2  5-43







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.