• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HEATER ASSEMBLY. - TM-9-6115-464-34_430
Figure 5-11. Electric Winterization Kit Wiring Harness, Drawing No. 72-2855

TM-9-6115-464-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 15 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
  404    405    406    407    408  409  410    411    412    413    414  
ARMY  TM  9-6115-464-34 AIR  FORCE  TO  35C2-3-445-2 NAVY   NAVFAC   P-8-624-34 (6)    Place  o-ring  (6)  into  groove  of  port  plate  (5),  then  position  port  plate  against  cam  ring  (7).  Align scribe  marks  and  secure  with  screws  (4). (7)    Install  ball  (3),  spring  (2),  and  plug  (1). e. Testing. Test coolant pump and motor assembly as directed in paragraph 5-4(e) (3). 5-12.   COOLANT   LINES   AND   FlTTINGS. Refer to the Operator and Unit  Maintenance Manual for electric winterization kit coolant lines and fittings maintenance   instructions. Figure 5-10. Coolant Pump and Motor Assembly, Exploded View 5-13.  WIRING  HARNESS. a. Refer to the Operator and Unit Maintenance Manual for wiring harness removal, cleaning, inspection, and repair procedures. b. If the wiring harness has sustained damage and requires repair or rebuild, refer to figure 5-11 for layout, identification of material requirements and Appendix A reference for detailed soldering and replacement procedures. c. Refer to Operator and Unit Maintenance Manual for wiring harness installation procedures. 5-28







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.