UNIT, INTERMEDIATE DIRECT SUPPORT AND
INTERMEDIATE GENERAL SUPPORT
REPAIR PARTS AND SPECIAL TOOLS LIST
a. This RPSTL lists and authorizes
spares and repair parts; special tools;
special test, measurement, and diagnos-
tic (TMDE); and other special support
equipment required for performance of
unit, intermediate direct support, and
intermediate general support maintenance
of the PU794/G.
It authorizes the
requisitioning, issue, and disposition
of spares, repair parts and special
tools as indicated by the source, main-
tenance and recoverability (SMR) codes.
This RPSTL lists only those new
parts required to upgrade the MEP-103A,
Precise, Generator Set, Diesel Engine
Driven, Tactical Skid Mounted, 15 kW, 3
Phase, 4 wire, 120/208 and 240/416 volts
to a 20 kW Generator Set.
are not listed in this RPSTL, refer to
In addition to Section I, Introduction,
this Repair Parts and Special Tools List
is divided into the following sections:
a. Section II - Repair Parts List. A
list of spares and repair parts autho-
rized by this RPSTL for use in the per-
formance of maintenance. The lists also
includes parts which must be removed for
replacement of the authorized parts.
Parts lists are composed of functional
groups in ascending alphanumeric sequence,
with the parts in each group listed in
ascending figure and item number sequence.
Bulk materials are listed by item name
in FIG BULK at the end of the section.
Repair parts kits or sets are listed
separately in their own functional group
within Section II. Repair parts for
repairable special tools are also listed
in the section.
Section III - Special Tools List.
A list of special tools, special TMDE,
and other special support equipment
authorized by this RPSTL (as indicated
by Basis of Issue (BOI) information in
DESCRIPTION AND USABLE ON CODE (UOC)
column) for the performance of mainte-
c. Section IV - National Stock Number
and Part Number Index.
A list, in
National Item Identification Number
(NIIN) sequence, of all National stock
numbered items appearing in the listings,
followed by a list in alphanumeric
sequence of all part numbers appearing
in the listing.
National stock numbers
and part numbers are cross-referenced to
each illustration figure and item number
Explanation of Columns (Section II
a. ITEM NO. (Column (1)).
the number used to identify items called
out in the illustration.
SMR CODE (Column (2))
Maintenance. and Recoverability (SMR)
code is a 5-position code containing
supply/requisitioning information, main-
tenance category authorization criteria,
and disposition instruction, as shown in
the following breakout: