Tag and disconnect cables from starter case and
starter solenoid. Remove jumper between batteries.
starter, and starter solenoid ter-
minals thoroughly and install new cables as given
(3) Replace. Attach jumper cable between nega-
tive (-) terminal of one battery and positive (+) ter-
minal of the other battery. Tighten terminal con-
nectors securely. Attach positive battery cable to
stud on starter solenoid. Attach negative battery cable
to stud on starter case (see figure 4-16). Attach posi-
tive cable to positive terminal on one battery and
negative cable to negative terminal on the other bat-
tery. Tighten terminal connectors securely.