P-9-TM-457-35 T.O. 35C2-3-442-2
TM-07464A-35 TM 5-6115-457-34
Figure 8-2. Alternator assembly, exploded view (sheet 2 of 2)
k. Inspect front bearing cavity for
evidence of wear. Check condition of re-
1. Check slip rings for pitting, rough-
ness or burned spots. If surface is worn
beyond repair, replace entire rotor
Do not attempt to turn slip ring
in a lathe.
m. Inspect rotor shaft for key slot
a. Slip rings may be cleaned up by
wear, worn bearing surfaces, scuff marks
cleaning contacting surfaces with a fine
on pole fingers, and condition of threads on
crocus cloth. Carefully wipe dust and
residue away after cleaning.
scored, pitted, scratched, cracked or
b. Repair minor thread damage on
rotor shaft using a suitable thread chaser.