Figure 68. Crankshaft pulley and vibration dampers.
(3) Sealing is accomplished by an internal
contact (spring loaded) of the inner and
outer parts of the seal, and the two parts
are so constructed that they form a single
Note. Install a new oil seal each time
the engine is disassembled.
b. Engine Front Mounting Bracket.
(a) Remove crankshaft pulley (para
remove cap (3).
(c) Raise front of engine slightly and
support with blocks, or chain and
(d) Remove bracket (6) from frame.
(2) Cleaning and Inspection.
(a) The bracket assembly is provided
with liners; if the material has
become hard or deteriorated, new
Figure 69. Removing crankshaft pulley/vibration
liners must be installed.