(Supersedes LO 5-6115-464-12,28 November 1990)
17 APRIL 1992
TACTICAL, SKID MTD, 15 KW, 3 PHASE, 4 WIRE,
References: TM 5-6115-464-12 and C9100-IL
You can help improve this publication. If you find mistakes or if you know of a way to improve the
p r o c e d u r e s , please let us know. Your letter or DA Form 2028 (Recommended Changes to Publica-
tions and Blank Forms) should be mailed directly to: Commander, U.S. Army Troop Support
C o m m a n d , ATTN: AMSTR-MMTS, 4300 Goodfellow Blvd., St. Louis , MO63120- 1798. A
w i l l be furnished to you.
This LO is for (C) Crew/Operator or Unit (O) maintenance. Lube intervals (on-condition or hard time) and
t a s k - h o u r times are based on normal hours of operation. Change the intervals if your lubricants are contaminated
o r if you are operating the equipment under adverse operating conditions. Lube more during constant use and less
d u r i n g inactive periods. Adequate preservation precautions must be taken during inactive periods.
D r y cleaning solvent PD-680 Type II or equivalent used to clean parts is potentially dangerous to personnel and
p r o p e r t y . Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of
s o l v e n t is 100F - 138F
C l e a n parts with dry cleaning solvent PD-680 and dry before lubricating.
On-condition (OC) intervals for oil changes shall be determined by the Army Oil Analysis Program (AOAP)
l a b o r a t o r y and shall be applied unless otherwise notified.
H a r d time oil change intervals will be applied in the event AOAP laboratory support is not available.
B e f o r e you start your lube service:
a. Clean parts before lubricating.
a. Use wrong type/grade lubricant.
b . Use the lubrication order as your guide.
b. Use too much lubricant.
D I S T R I B U T I O N S T A T E M E N T A - Approved for public release; distribution is unlimited.
Card 1 of 4